API Pipe, API 5L Pipe, API 5L Line Pipe, API 5L Seamless Pipe, API 5L X Grade Pipe, API 5L PSL1 Pipe, API 5L PSL2 Pipe.
Dealer of API 5L Pipe in Grade B, X42, X46, X52, X56, X60, X65. Our API 5L Grade B, X42, X46, X52, X56, X60, X65 Pipe is IBR Approved, Dealer, Distributor, Exporter, Supplier in India.
API 5L Grade Seamless Pipe is a high-quality steel pipe used in the oil and natural gas industry for the transportation of fluids, such as crude oil, natural gas, and water. It is designed and manufactured according to the specifications outlined by the American Petroleum Institute (API). These specifications are set to ensure the safe and efficient transportation of hydrocarbons and other fluids over long distances, both onshore and offshore. API 5L Grade Seamless Pipe is a crucial component of the energy infrastructure, as it forms the backbone of pipelines that deliver vital resources to consumers and industries worldwide.
Valour Alloys Inc., we carry a full inventory of API 5L Grade Seamless Pipe products in a variety of sizes to meet the project piping requirements for applications the water, petroleum, oil & gas and other industries. API 5L Grade Seamless Pipe can be Structural in Nature or used in Fluid, Gas, Oil Transmission.
We are specializes in API 5L Grade Seamless Pipe with years of Experience in Manufacturing ASTM A672 C70 EFW Pipe. we offer high quality, lower cost but the best service. As a result to that our API 5L Grade Seamless Pipe export account today is in various countries like Iran, Iraq, Kuwait, Saudi Arabia, Oman, UAE, Singapore, Malaysia, Indonesia, South korea, Chile, Peru, Venezuela, Australia, Nigeria, Angola, Senegal, Mozambique, Algeria, Libya, Azerbaijan, Netherlands, Brazil, Norway, United Kingdom, Mexico, Canada etc.

API 5L Grade Seamless Pipes

API 5L Grade Welded Pipes
We Supply API 5L Line Pipe in API 5L Grade B PSL1, API 5L Grade B PSL2, API 5L X42 PSL1, API 5L X42 PSL2, API 5L X46 PSL1, API 5L X46 PSL2, API 5L X52 PSL1, API 5L X52 PSL2, API 5L X56 PSL1, API 5L X56 PSL2, API 5L X60 PSL1, API 5L X60 PSL2, API 5L X65 PSL1, API 5L X65 PSL2 , API 5L X70 PSL1, API 5L X70 PSL2. The grade indicates the testing methods required for a given application. It is critical that structural grades of Carbon Steel Pipe not be used for Pressure or Fluid applications.
ISO 15156/ NACE MR0175 API 5L Gr B Pipe supplier in Mumbai, view CS API 5L Grade B Welded Pipe ready stock, dimensions, specification and properties, API 5L Grade Seamless Pipes Manufacturer.
Quality and Durability: API 5L Grade Seamless Pipe is known for its high-quality construction and durability. It is engineered to withstand extreme temperatures, pressures, and environmental conditions, making it suitable for use in various challenging environments.
Materials: These pipes are typically made from carbon steel, which provides excellent strength and corrosion resistance. The specific steel grades, such as API 5L Grade B, X42, X52, X60, and others, are chosen based on the intended application and the conditions the pipe will be exposed to.
Seamless Construction: API 5L Grade Seamless Pipe is manufactured using a seamless production process. This means that the pipe is created without any welded seams, which can be a potential weak point. Seamless construction ensures uniformity and integrity along the entire length of the pipe.
Size Range: These pipes come in a wide range of sizes and diameters, allowing for flexibility in designing and constructing pipelines tailored to specific project requirements.
Regulatory Compliance: API 5L Grade Seamless Pipe adheres to strict industry standards and regulations established by the American Petroleum Institute. This ensures that the pipes meet the safety and performance standards required for the transportation of hazardous fluids.
Global Importance: These pipes play a vital role in the global energy supply chain, enabling the efficient and safe transportation of energy resources from production sites to distribution networks, refineries, and end-users.
API 5L Grade Seamless Pipe is a critical component in the energy sector, ensuring the reliable and safe transportation of fluids essential for modern life. Its quality, durability, and adherence to industry standards make it a preferred choice for infrastructure projects in the oil and gas industry.
API 5L Grade Seamless Pipes Range
API 5L Grade Pipes Outer Diameter Size | 3/8" NB To 30" NB (Nominal Bore Size) |
API 5L Grade Pipes Wall Thickness | Schedule 20 To Schedule XXS (Heavier On Request) Up to 250 mm Thickness |
API 5L Grade Pipes Length | 5 To 7 Meters, 09 To 13 Meters, Single Random Length, Double Random Length And Customize Size. |
API 5L Grade Pipes Ends | Plain Ends / Beveled Ends / Coupling |
API 5L Grade Pipes Specification | API 5L / ISO 3183 Hot Rolled. |
API 5L Grade Pipes Grades | API 5L GRADE B PSL1, PSL 2 / API 5L X42 PSL1, PSL 2 / API 5L X46 PSL1, PSL 2 / API 5L X52 PSL1, PSL 2 / API 5L X56 PSL1, PSL 2 / API 5L X60 PSL1, PSL 2 / API 5L X65 PSL1, PSL 2 / X70 PSL1, PSL 2 / API 5L X70 PSL1 / PSL2 / API 5L X80 PSL1, PSL 2 / L245 PSL1, PSL 2, L290 PSL1, PSL 2, L320 PSL1, PSL 2, L360 PSL1, PSL 2, L390 PSL1, PSL 2, L415 PSL1, PSL 2, L450 PSL1, PSL 2, L485 PSL1, PSL 2 |
API 5L Grade Pipes Dimension | All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM, ASME, API. |
API 5L Grade Pipes Type | EFW (ELECTRIC FUSION WELDED PIPES) |
API 5L Grade Pipes Delivery Conditions | As Rolled, Normalizing Rolled, Thermomechanical Rolled / Formed, Normalizing Formed, Normalized and Tempered / Quenched and Tempered - BR / N / Q /T |
API 5L Grade Pipes Coating | Epoxy Coating / Colour Paint Coating / 3LPE Coating. |
API 5L Grade Pipes Machinery | Draw Bench / Pilger / De-Coiler / Edge Miller / Welding Line / Heat Treatmen Furnace / Pickling Tank / Cutting Bench etc. |
API 5L Grade Pipes Value Added Services | Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Galavanizing / Heat Treatment |
API 5L Grade Pipes Packaging | Loose / Bundle / Wooden Pallet / Wooden Box / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
API 5L Grade Pipes Shipment & Transportation | By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes |
API 5L Grade Pipes Other Testing | NACE MR0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, SWC, H2 SERVICE, IBR, Etc. |
API 5L Grade Pipes Material Test Certificate | Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab./ Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC |
Chemical Composition of API 5L Line Pipe PSL1 Pipes
Steel Grade | Mass fraction, % based on heat and product analyses a,g | ||||||
C | Mn | P | S | V | Nb | Ti | |
max b | max b | max | max | max | max | max | |
Seamless Pipe | |||||||
A | 0.22 | 0.9 | 0.3 | 0.3 | – | – | – |
B | 0.28 | 1.2 | 0.3 | 0.3 | c,d | c,d | d |
X42 | 0.28 | 1.3 | 0.3 | 0.3 | d | d | d |
X46 | 0.28 | 1.4 | 0.3 | 0.3 | d | d | d |
X52 | 0.28 | 1.4 | 0.3 | 0.3 | d | d | d |
X56 | 0.28 | 1.4 | 0.3 | 0.3 | d | d | d |
X60 | 0.28 e | 1.40 e | 0.3 | 0.3 | f | f | f |
X65 | 0.28 e | 1.40 e | 0.3 | 0.3 | f | f | f |
X70 | 0.28 e | 1.40 e | 0.3 | 0.3 | f | f | f |
Welded Pipe | |||||||
A | 0.22 | 0.9 | 0.3 | 0.3 | – | – | – |
B | 0.26 | 1.2 | 0.3 | 0.3 | c,d | c,d | d |
X42 | 0.26 | 1.3 | 0.3 | 0.3 | d | d | d |
X46 | 0.26 | 1.4 | 0.3 | 0.3 | d | d | d |
X52 | 0.26 | 1.4 | 0.3 | 0.3 | d | d | d |
X56 | 0.26 | 1.4 | 0.3 | 0.3 | d | d | d |
X60 | 0.26 e | 1.40 e | 0.3 | 0.3 | f | f | f |
X65 | 0.26 e | 1.45 e | 0.3 | 0.3 | f | f | f |
X70 | 0.26e | 1.65 e | 0.3 | 0.3 | f | f | f |
a. Cu ≤ = 0.50% Ni; ≤ 0.50%; Cr ≤ 0.50%; and Mo ≤ 0.15%, b. For each reduction of 0.01% below the specified max. concentration for carbon, and increase of 0.05% above the specified max. concentration for Mn is permissible, up to a max. of 1.65% for grades ≥ B, but ≤ = X52; up to a max. of 1.75% for grades > X52, but < X70; and up to a maximum of 2.00% for X70., c. Unless otherwise agreed NB + V ≤ 0.06%, d. Nb + V + TI ≤ 0.15%, e. Unless otherwise agreed., f. Unless otherwise agreed, NB + V = Ti ≤ 0.15%, g. No deliberate addition of B is permitted and the residual B ≤ 0.001% |
|||||||
Chemical Composition of API 5L Line Pipe PSL2 Pipes
Steel Grade | Mass fraction, % based on heat and product analyses | Carbon Equiv a | |||||||||||||
C | Si | Mn | P | S | V | Nb | Ti | Other | CE IIW | CE Pcm | |||||
max b | max | max b | max | max | max | max | max | max | max | ||||||
Seamless and Welded Pipe | |||||||||||||||
BR | 0.24 | 0.4 | 1.2 | 0.025 | 0.015 | c | c | 0.04 | e,l | 0.043 | 0.25 | ||||
X42R | 0.24 | 0.4 | 1.2 | 0.025 | 0.015 | 0.06 | 0.05 | 0.04 | e,l | 0.043 | 0.25 | ||||
BN | 0.24 | 0.4 | 1.2 | 0.025 | 0.015 | c | c | 0.04 | e,l | 0.043 | 0.25 | ||||
X42N | 0.24 | 0.4 | 1.2 | 0.025 | 0.015 | 0.06 | 0.05 | 0.04 | e,l | 0.043 | 0.25 | ||||
X46N | 0.24 | 0.4 | 1.4 | 0.025 | 0.015 | 0.07 | 0.05 | 0.04 | d,e,l | 0.043 | 0.25 | ||||
X52N | 0.24 | 0.45 | 1.4 | 0.025 | 0.015 | 0.1 | 0.05 | 0.04 | d,e,l | 0.043 | 0.25 | ||||
X56N | 0.24 | 0.45 | 1.4 | 0.025 | 0.015 | 0.10f | 0.05 | 0.04 | d,e,l | 0.043 | 0.25 | ||||
X60N | 0.24f | 0.45f | 1.40f | 0.025 | 0.015 | 0.10f | 0.05f | 0.04f | g,h,l | As agreed | |||||
BQ | 0.18 | 0.45 | 1.4 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e,l | 0.043 | 0.25 | ||||
X42Q | 0.18 | 0.45 | 1.4 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e,l | 0.043 | 0.25 | ||||
X46Q | 0.18 | 0.45 | 1.4 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e,l | 0.043 | 0.25 | ||||
X52Q | 0.18 | 0.45 | 1.5 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e,l | 0.043 | 0.25 | ||||
X56Q | 0.18 | 0.45f | 1.5 | 0.025 | 0.015 | 0.07 | 0.05 | 0.04 | e,l | 0.043 | 0.25 | ||||
X60Q | 0.18f | 0.45f | 1.70f | 0.025 | 0.015 | g | g | g | h,l | 0.043 | 0.25 | ||||
X65Q | 0.18f | 0.45f | 1.70f | 0.025 | 0.015 | g | g | g | h,l | 0.043 | 0.25 | ||||
X70Q | 0.18f | 0.45f | 1.80f | 0.025 | 0.015 | g | g | g | h,l | 0.043 | 0.25 | ||||
X80Q | 0.18f | 0.45f | 1.90f | 0.025 | 0.015 | g | g | g | i,j | As agreed | |||||
X90Q | 0.16f | 0.45f | 1.9 | 0.02 | 0.01 | g | g | g | j,k | As agreed | |||||
X100Q | 0.16f | 0.45f | 1.9 | 0.02 | 0.01 | g | g | g | j,k | As agreed | |||||
Welded Pipe | |||||||||||||||
BM | 0.22 | 0.45 | 1.2 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e,l | 0.043 | 0.25 | ||||
X42M | 0.22 | 0.45 | 1.3 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e,l | 0.043 | 0.25 | ||||
X46M | 0.22 | 0.45 | 1.3 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e,l | 0.043 | 0.25 | ||||
X52M | 0.22 | 0.45 | 1.4 | 0.025 | 0.015 | d | d | d | e,l | 0.043 | 0.25 | ||||
X56M | 0.22 | 0.45f | 1.4 | 0.025 | 0.015 | d | d | d | e,l | 0.043 | 0.25 | ||||
X60M | 0.12f | 0.45f | 1.60f | 0.025 | 0.015 | g | g | g | h,l | 0.043 | 0.25 | ||||
X65M | 0.12f | 0.45f | 1.60f | 0.025 | 0.015 | g | g | g | h,l | 0.043 | 0.25 | ||||
X70M | 0.12f | 0.45f | 1.70f | 0.025 | 0.015 | g | g | g | h,l | 0.043 | 0.25 | ||||
X80M | 0.12f | 0.45f | 1.85f | 0.025 | 0.015 | g | g | g | i,j | .043f | 0.25 | ||||
X90M | 0.1 | 0.55f | 2.10f | 0.02 | 0.01 | g | g | g | i,j | – | 0.25 | ||||
X100M | 0.1 | 0.55f | 2.10f | 0.02 | 0.01 | g | g | g | i,j | – | 0.25 | ||||
a. SMLS t>0.787”, CE limits shall be as agreed. The CEIIW limits applied fi C > 0.12% and the CEPcm limits apply if C ≤ 0.12%, b. For each reduction of 0.01% below the specified max. concentration for carbon, and increase of 0.05% above the specified max. concentration for Mn is permissible, up to a max. of 1.65% for grades ≥ B, but ≤ = X52; up to a max. of 1.75% for grades > X52, but < X70; and up to a maximum of 2.00% for X70., c. Unless otherwise agreed Nb = V ≤ 0.06%, d. Nb = V = Ti ≤ 0.15%, e. Unless otherwise agreed, Cu ≤ 0.50%; Ni ≤ 0.30% Cr ≤ 0.30% and Mo ≤ 0.15%, f. Unless otherwise agreed, g. Unless otherwise agreed, Nb + V + Ti ≤ 0.15%, h. Unless otherwise agreed, Cu ≤ 0.50% Ni ≤ 0.50% Cr ≤ 0.50% and MO ≤ 0.50%, i. Unless otherwise agreed, Cu ≤ 0.50% Ni ≤ 1.00% Cr ≤ 0.50% and MO ≤ 0.50%, j. B ≤ 0.004%, k. Unless otherwise agreed, Cu ≤ 0.50% Ni ≤ 1.00% Cr ≤ 0.55% and MO ≤ 0.80%, l. For all PSL 2 pipe grades except those grades with footnotes j noted, the following applies. Unless otherwise agreed no intentional addition of B is permitted and residual B ≤ 0.001% . |
|||||||||||||||
Mechanical Properties of API 5L Seamless Pipes
Pipe Grade | Tensile Properties – Pipe Body of SMLS and Welded Pipes PSL 1 | Seam of Welded Pipe | ||
Yield Strength a | Tensile Strength a | Elongation | Tensile Strength b | |
Rt0,5 PSI Min | Rm PSI Min | (in 2in Af % min) | Rm PSI Min | |
A | 30,500 | 48,600 | c | 48,600 |
B | 35,500 | 60,200 | c | 60,200 |
X42 | 42,100 | 60,200 | c | 60,200 |
X46 | 46,400 | 63,100 | c | 63,100 |
X52 | 52,200 | 66,700 | c | 66,700 |
X56 | 56,600 | 71,100 | c | 71,100 |
X60 | 60,200 | 75,400 | c | 75,400 |
X65 | 65,300 | 77,500 | c | 77,500 |
X70 | 70,300 | 82,700 | c | 82,700 |
a. For intermediate grade, the difference between the specified minimum tensile strength and the specified minimum yield for the pipe body shall be as given for the next higher grade b. For the intermediate grades, the specified minimum tensile strength for the weld seam shall be the same as determined for the body using foot note a c. The specified minimum elongation, Af, expressed in percent and rounded to the nearest percent, shall be determined using the following equation ![]() Where C is 1 940 for calculation using Si units and 625 000 for calculation using USC units Axc is the applicable tensile test piece cross-sectional area, expressed in square millimeters (square inches) , as follows For circular cross-section test pieces, 130mm2 (0.20 in2) for 12.7 mm (0.500 in) and 8.9 mm (.350 in) diameter test pieces; and 65 mm2 (0.10 in2) for 6.4 mm (0.250in) diameter test pieces. For full-section test pieces, the lesser of a) 485 mm2 (0.75 in2) and b) the cross-sectional area of the test piece, derived using the specified outside diameter and the specified wall thickness of the pipe, rounded to the nearest 10 mm2 (0.10in2 – For strip test pieces, the lesser of a) 485 mm2 (0.75 in2) and b) the cross-sectional area of the test piece, derived using the specified width of the test piece and the specified wall thickness of the pipe, rounded to the nearest 10 mm2 (0.10in2 U is the specified minimum tensile strength, expressed in megapascals (pounds per square inch) |
Pipe Grade | Tensile Properties – Pipe Body of SMLS and Welded Pipes PSL 2 | Seam of Welded Pipe | |||||
---|---|---|---|---|---|---|---|
Yield Strength a | Tensile Strength a | Ratio a,c | Elongation | Tensile Strength d | |||
Rt0,5 PSI Min | Rm PSI Min | R10,5IRm | (in 2in) | Rm (psi) | |||
Af % | |||||||
Minimum | Maximum | Minimum | Maximum | Maximum | Minimum | Minimum | |
BR, BN,BQ,BM | 35,500 | 65,300 | 60,200 | 95,000 | 0.93 | f | 60,200 |
X42,X42R,X2Q,X42M | 42,100 | 71,800 | 60,200 | 95,000 | 0.93 | f | 60,200 |
X46N,X46Q,X46M | 46,400 | 76,100 | 63,100 | 95,000 | 0.93 | f | 63,100 |
X52N,X52Q,X52M | 52,200 | 76,900 | 66,700 | 110,200 | 0.93 | f | 66,700 |
X56N,X56Q,X56M | 56,600 | 79,000 | 71,100 | 110,200 | 0.93 | f | 71,100 |
X60N,X60Q,S60M | 60,200 | 81,900 | 75,400 | 110,200 | 0.93 | f | 75,400 |
X65Q,X65M | 65,300 | 87,000 | 77,600 | 110,200 | 0.93 | f | 76,600 |
X70Q,X65M | 70,300 | 92,100 | 82,700 | 110,200 | 0.93 | f | 82,700 |
X80Q,X80M | 80,.500 | 102,300 | 90,600 | 119,700 | 0.93 | f | 90,600 |
a. For intermediate grade, refer to the full API5L specification. b. for grades > X90 refer to the full API5L specification. c. This limit applies for pies with D> 12.750 in d. For intermediate grades, the specified minimum tensile strength for the weld seam shall be the same value as was determined for the pipe body using foot a. e. for pipe requiring longitudinal testing, the maximum yield strength shall be ≤ 71,800 psi f. The specified minimum elongation, Af, expressed in percent and rounded to the nearest percent, shall be determined using the following equation: ![]() Where C is 1 940 for calculation using Si units and 625 000 for calculation using USC units Axc is the applicable tensile test piece cross-sectional area, expressed in square millimeters (square inches) , as follows – For circular cross-section test pieces, 130mm2 (0.20 in2) for 12.7 mm (0.500 in) and 8.9 mm (.350 in) diameter test pieces; and 65 mm2 (0.10 in2) for 6.4 mm (0.250in) diameter test pieces. – For full-section test pieces, the lesser of a) 485 mm2 (0.75 in2) and b) the cross-sectional area of the test piece, derived using the specified outside diameter and the specified wall thickness of the pipe, rounded to the nearest 10 mm2 (0.10in2) – For strip test pieces, the lesser of a) 485 mm2 (0.75 in2) and b) the cross-sectional area of the test piece, derived using the specified width of the test piece and the specified wall thickness of the pipe, rounded to the nearest 10 mm2 (0.10in2) U is the specified minimum tensile strength, expressed in megapascals (pounds per square inch g. Lower values fo R10,5IRm may be specified by agreement h. for grades > x90 refer to the full API5L specification. |
Other Available Products of API 5L Grade Pipes
CS API Line Pipes Exporter | API 5L Grade X46 Seamless Tubes |
Carbon Steel A106 Line Pipes | Carbon Steel API 5L Grade X52 Pipes |
Carbon Steel API 5L Line Pipe | Carbon Steel A106 ERW Pipes Suppliers |
CS API 5L Line Pipes | Carbon Steel API 5L Line Pipes |
API 5L Grade B X60 Line Pipes Exporter | Carbon Steel API 5L Line Pipes |
API 5L GR. B X56 Pipes Dealer | Carbon Steel API 5L Line Pipes Suppliers |
Carbon Steel API 5L Line Pipes | API 5L GR. B X52 Line Pipes |
Carbon Steel API 5L Line Pipes Manufacturer | API 5L Grade X46 CS Pipes Distributors |
Carbon Steel PSL 2 Welded Pipes Stockholder | Top Quality API 5L Carbon Steel A106 Line Pipes |
Carbon Steel API 5L Pipes | CS Line Pipes Stockiest in India |
Carbon Steel API 5L Grade X56 Welded Pipes | Carbon Steel PSL 1 Line Pipes |
API 5L Grade Pipes Application
- Oil and Gas equipments
- Offshore Technology
- Seawater Desalination Plants
- Chemical Industry
- Airport, Malls, Buildings
- Storage Tanks
- Medical Industry
- Civil Engineering
- Pressure vessels, Reactor tanks, and Heat exchangers
- Rotors, impellers and shafts
- Power Plants
- Petrochemical
- Shipbuilding Industry
- Mining Industry
- Food Equipments Industry
Test Certificates
We API 5L Grade Seamless Pipe with the following details Mill Test Certificate according to EN 10204 3.1, PMI Test, Test Report from NABL Approved Lab, 3.2 Certification by External Testing Authority third, ultrasonic test report, and X-ray report.
Quality Assurance
At API 5L Grade Seamless Pipe all types of Such as API 5L Grade B, X42, X46, X52, X56, X60, X65, X70, X80 PSL1 & PSL2 from raw material purchase to production and product shipping. They are visually inspected for compliance with ASTM, ASME, DIN, EN and JIS codes and standards. We can also designate certified official testing agencies upon customer request so that they can witness the product's material, size and quality compliance reports.
Marking & Packing
Our API 5L Grade Seamless Pipe is packaged to ensure no damage during transit. In the case of export, the standard export packing is in a wooden box. All API 5L Grade Seamless Pipe are marked with our grade, batch number, size and mark. We can also do custom branding on our products as per buyer's unique requirements
Supplying API 5L GPipes to Countries -
We Export API 5L Pipes to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East Etc.
Distributing API 5L Pipes to Cities -
We Export API 5L Pipes to Navi Mumbai, Indore, Baroda, Muscat, Secunderabad, Gimhae-si, Kanpur, Colombo, Kuala Lumpur, Bhopal, Pimpri-Chinchwad, Rajkot, Haryana, Hanoi, Ernakulam, Chandigarh, Surat, Los Angeles, Hong Kong, Ahmedabad, Perth, Petaling Jaya, Hyderabad, Mumbai, Algiers, Edmonton, Ludhiana, Ho Chi Minh City, Karachi, Bangkok, Dallas, Bengaluru, Jakarta, Granada, Seoul, Cairo, Geoje-si, Rio de Janeiro, Abu Dhabi, Port-of-Spain, Sydney, London, Courbevoie, Vung Tau, Sharjah, Jaipur, Lahore, Chennai, Istanbul, Lagos, Thane, Dubai, Coimbatore, La Victoria, Calgary, Jeddah, Busan, Mexico City, Al Khobar, Caracas, Singapore, Atyrau, Manama, Kolkata, Riyadh, Jamshedpur, Brisbane, Toronto, Noida, Ahvaz, Vadodara, Doha, Visakhapatnam, Ulsan, New Delhi, Gurgaon, Bogota, Howrah, Moscow, Nashik, Ranchi, Nagpur, Al Jubail, Houston, Milan, Chiyoda, Aberdeen, Melbourne, New York, Dammam, Montreal, Santiago, Kuwait City, Pune, Tehran, Thiruvananthapuram, Faridabad, Madrid, Ankara Etc.
Frequently Ask Questions (FAQ)
api 5l x52 specification, api 5l x52 equivalent astm, api 5l pipe tolerances, api 5l pipe sizes, api 5l pipe schedule chart pdf, api 5l 2018 pdf, api 5l pipe dimensions metric, api 5l 46th edition, api 5l x52 specification, api 5l pipe schedule chart pdf, api 5l pipe dimensions, api 5l grade b equivalent, api 5l pipe tolerances, api 5l x52 equivalent astm, api 5l grade b yield strength, api pipe chart,api pipe chart, api pipe manufacturers in india, api 5l meaning, api 5l grade b equivalent