ISO 3183 L290 Pipe, ISO 3183 L290 Line Pipe, ISO 3183 L290 Seamless Pipe, ISO 3183 L290 LSAW Pipe, ISO 3183 Grade L290 Pipe, ISO 3183 L290 PSL1 Pipe, ISO 3183 L290 PSL2 Pipe, API 5L X42 Pipe.

Dealer of ISO 3183 L290 Pipe. Our ISO 3183 L290 Pipe is IBR Approved, we are Best Dealer, Distributor, Exporter, Supplier in India.

ISO 3183 L290 is a specific grade of steel pipe that conforms to the International Organization for Standardization (ISO) 3183 standard. This standard sets the requirements for the design, manufacturing, and testing of steel pipelines used for the transportation of petroleum and natural gas. ISO 3183 is widely recognized and used in the oil and gas industry to ensure the safety and reliability of pipelines.

Valour Alloys Inc., we carry a full inventory of ISO 3183 L290 Pipe products in a variety of sizes to meet the structural piping requirements for applications the water, petroleum, oil & gas and other industries. ISO 3183 L290 Pipe can be Structural in Nature or used in Fluid, Gas, Oil Transmission.

We are specializes in ISO 3183 L290 Pipe with years of Experience in Manufacturing ISO 3183 Carbon Steel Pipes. we offer high quality, lower cost but the best service. As a result to that our ISO 3183 Carbon Steel Pipes export account today is in various countries like Iran, Iraq, Kuwait, Saudi Arabia, Oman, UAE, Singapore, Malaysia, Indonesia, South korea, Chile, Peru, Venezuela, Australia, Nigeria, Angola, Senegal, Mozambique, Algeria, Libya, Azerbaijan, Netherlands, Brazil, Norway, United Kingdom, Mexico, Canada etc.


ISO 3183 L290 Seamless Pipes Manufacturer

ISO 3183 L290 Seamless Pipes

ISO 3183 L290 Welded Pipes Exporter

ISO 3183 L290 Welded Pipes

We Supply ISO 3183 Seamless Pipe in ISO 3183 L245 PSL1, ISO 3183 L245 PSL2, ISO 3183 L290 PSL1, ISO 3183 L290 PSL2, ISO 3183 L320 PSL1, ISO 3183 L320 PSL2, ISO 3183 L390 PSL1, ISO 3183 L390 PSL2, ISO 3183 L415 PSL1, ISO 3183 L415 PSL2, ISO 3183 L450 PSL1, ISO 3183 L450 PSL2. The grade indicates the testing methods required for a given application. It is critical that structural grades of Carbon Steel Pipe not be used for Pressure or Fluid applications.

ISO 3183 L290 Pipes Suppliers, ISO 3183 L290 Seamless Pipe,one of the leading stockist of ISO 3183 L290 Pipes, ISO 3183 L290 Welded Pipe, Largest Manufacturer of ISO 3183 L290 Pipes in Mumbai India, High Qaulity Exporter of ISO 3183 L290 Pipes

1. ISO 3183 Standard: ISO 3183 is an international standard that provides guidelines for the design and construction of steel pipelines for the transportation of hydrocarbons, such as crude oil and natural gas. It covers various grades of steel pipes, each with specific mechanical and chemical properties.

2. L290 Grade: ISO 3183 L290 is a specific grade within the standard. The "L" stands for "line pipe," indicating that it is designed for use in pipelines. The number "290" represents the minimum yield strength of the steel in megapascals (MPa), which in this case is 290 MPa. The minimum yield strength is an important parameter as it determines the pipe's ability to withstand stress and pressure in service.

3. Application: ISO 3183 L290 steel pipes are typically used in the construction of pipelines for the transportation of hydrocarbons over long distances. They are suitable for both onshore and offshore applications and are designed to operate under various environmental and operating conditions.

4. Mechanical and Chemical Properties: ISO 3183 L290 steel pipes must meet specific mechanical and chemical requirements outlined in the standard. These properties include minimum yield strength, tensile strength, elongation, and chemical composition, ensuring the pipe's reliability and durability in demanding conditions.

5. Testing and Inspection: The standard also specifies testing and inspection procedures to ensure the quality of ISO 3183 L290 pipes. This includes non-destructive testing, such as ultrasonic and radiographic examination, to detect any defects or weaknesses in the pipes.

ISO 3183 L290 is a grade of steel pipe designed for the safe and efficient transportation of petroleum and natural gas. It meets stringent standards for mechanical properties and undergoes rigorous testing to ensure its reliability in critical energy infrastructure applications.

ISO 3183 L290 Pipe Range

ISO 3183 L290 Pipe Outer Diameter Size 3/8" NB To 30" NB (Nominal Bore Size)
ISO 3183 L290 Pipe Wall Thickness Schedule 20 To Schedule XXS (Heavier On Request) Up to 250 mm Thickness
ISO 3183 L290 Pipe Length 5 To 7 Meters, 09 To 13 Meters, Single Random Length, Double Random Length And Customize Size.
ISO 3183 L290 Pipe Ends Plain Ends / Beveled Ends / Coupling
ISO 3183 L290 Pipe Specification ISO 3183
ISO 3183 L290 Pipe Grades ISO 3183 Grade L245 PSL1, ISO 3183 Grade L245 PSL2, ISO 3183 Grade L290 PSL1, ISO 3183 Grade L290 PSL2, ISO 3183 Grade L320 PSL1, ISO 3183 Grade L320 PSL2, ISO 3183 Grade L360 PSL1, ISO 3183 Grade L360 PSL2, ISO 3183 Grade L390 PSL1, ISO 3183 Grade L390 PSL2, ISO 3183 Grade L415 PSL1, ISO 3183 Grade L415 PSL2, ISO 3183 Grade L450 PSL1, ISO 3183 Grade L450 PSL2, ISO 3183 Grade L485 PSL1, ISO 3183 Grade L485 PSL2
ISO 3183 L290 Pipe Dimension All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM, ASME, API.
ISO 3183 L290 Pipe Type Seamless / Welded
ISO 3183 L290 Pipe Delivery Conditions As Rolled, Normalizing Rolled, Hot Forming, Cold Finishing Thermomechanical Rolled / Formed, Normalizing Formed, Normalized and Tempered / Quenched and Tempered - BR / N / Q /T
ISO 3183 L290 Pipe Coating Epoxy Coating / Colour Paint Coating / 3LPE Coating.
ISO 3183 L290 Pipe Machinery Draw Bench / Pilger / De-Coiler / Edge Miller / Welding Line / Heat Treatmen Furnace / Pickling Tank / Cutting Bench etc.
ISO 3183 L290 Pipe Value Added Services Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Galavanizing / Heat Treatment
ISO 3183 L290 Pipe Packaging Loose / Bundle / Wooden Pallet / Wooden Box / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector
ISO 3183 L290 Pipe Shipment & Transportation By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet
ISO 3183 L290 Pipe Other Testing NACE MR0175, NACE TM0177, SOUR SERVICE, NACE TM0284, PWHT, HIC TEST, SSC TEST, SWC, H2 SERVICE, IBR, IPS-M-PI190, IPS-M-PI-221 APPENDIX G Etc.
ISO 3183 L290 Pipe Material Test Certificate Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab./ Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC

Chemical Composition of ISO 3183 L290 PSL1 Pipes

Steel grade
(Steel name)
Mass fraction, based upon heat and product analyses a %
C Mn P S V Nb Ti
max. b  max. b  min. max. max. max. max. max.
Seamless Pipe
L290 or X42 0,28 1,30  - 0,03 0,03 d d d
Welded Pipe
L290 or X42 0,26 1,30  - 0,03 0,03 d d d
a 0,50 % maximum for copper; 0,50 % maximum for nickel; 0,50 % maximum for chromium; and 0,15 % maximum for molybdenum,For grades up to and including L360/X52, Cu, Cr and Ni shall not be added intentionally.
b For each reduction of 0,01 % below the specified maximum concentration for carbon, an increase of 0,05 % above the specified maximum concentration for manganese is permissible, up to a maximum of 1,65 % for grades W L245 or B, but u L360 or X52; up to a maximum of 1,75 % for grades > L360 or X52, but < L485 or X70; and up to a maximum of 2,00 % for grade L485 or X70,
c Unless otherwise agreed, the sum of the niobium and vanadium contents shall be u 0,06 %,
d The sum of the niobium, vanadium and titanium concentrations shall be u 0,15%,
e Unless otherwise agreed.
f Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be u 0,15 %.

Chemical Composition of ISO 3183 L290 PSL2 Pipes

Steel grade
(Steel name)
Mass fraction, based upon heat and product analyses a % Carbon equivalent a % maximum
C Si Mn P S V Nb Ti Other CE iiw CE pcm
Seamless Pipe
L290R or X42 R 0,24 0,4 1,2 0,025 0,015 0,06 0,05 0,04 e 0,43 0,25
Welded Pipe
L290Q or X42Q 0,18 0,45 1,4 0,025 0,015 0,05 0,05 0,04 e 0,43 0,25
a Based upon product analysis. For seamless pipe with t > 20,0 mm (0.787 in), the carbon equivalent limits shall be as agreed. The CEIIW limits apply if the carbon mass fraction is greater than 0,12 % and the CEPcm limits apply if the carbon mass fraction is less than or equal to 0,12 %.
b For each reduction of 0,01 % below the specified maximum for carbon, an increase of 0,05 % above the specified maximum for
manganese is permissible, up to a maximum of 1,65 % for grades W L245 or B, but u L360 or X52; up to a maximum of 1,75 % for
grades > L360 or X52, but < L485 or X70; up to a maximum of 2,00 % for grades W L485 or X70, but u L555 or X80; and up to a
maximum of 2,20 % for grades > L555 or X80.
c Unless otherwise agreed, the sum of the niobium and vanadium concentrations shall be u 0,06 %.
d The sum of the niobium, vanadium and titanium concentrations shall be u 0,15 %.
e Unless otherwise agreed, 0,50 % maximum for copper, 0,30 % maximum for nickel, 0,30 % maximum for chromium and 0,15 %
maximum for molybdenum.
f Unless otherwise agreed.
g Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be u 0,15 %.
Unless otherwise agreed, 0,50 % maximum for copper, 0,50 % maximum for nickel, 0,50 % maximum for chromium and 0,50 %
maximum for molybdenum.
i Unless otherwise agreed, 0,50 % maximum for copper, 1,00 % maximum for nickel, 0,50 % maximum for chromium and 0,50 %
maximum for molybdenum.
j 0,004 % maximum for boron.

Mechanical Properties of ISO 3183 L290 PSL1 Pipes

Pipe Grade Pipe Body of Seamless and Welded Pipes Weld seam of EW, SAW and COW pipes
Yeild strength a Tensile strength a Elongation Tensile strength b
Rt0.5 Rm Af Rm
Mpa (psi) Mpa (psi) % Mpa (psi)
minimum minimum minimum minimum
L290R or x42R
L290 or x42
290 (42 100) 415 (60 200) c 415 (60 200)

Mechanical Properties of ISO 3183 L290 PSL2 Pipes

Pipe grade Pipe Body of Seamless and Welded Pipes weld seam of HFW, SAW and COW pipes
Yield Strength a Tensile Strength a Ratio a,b,c Elongation Af Tensile strength d
Rt0.5 b Rm Rt0,5lRm    Rm
Mpa (psi) Mpa (psi)    % Mpa (psi)
minimum maximum minimum maximum maximum minimum minimum
L290R or X42R
L290N or X42N
L290Q or X42Q
L290M or X42M
290
(42 100)
495
(71 800)
415
(60 200)
760
(110 200)
0,93 f 415
(60 200)

Other Available Products of ISO 3183 L290 Pipes

Carbon Steel ISO 3183 Line Pipes ISO 3183 L245 Pipe Supplier
ISO 3183 L245 Pipe ISO 3183 L290 Pipe Dealer
ISO 3183 L290 Pipe ISO 3183 L320 Pipe Stockholder
ISO 3183 L320 Pipe ISO 3183 L360 Pipe Exporter
ISO 3183 L360 Pipe ISO 3183 L390 Pipe Distributor
ISO 3183 L390 Pipe ISO 3183 PSL1 Pipes
ISO 3183 L415 Pipe ISO 3183 PSL2 Pipes
ISO 3183 L450 Pipe API 5L X42 Pipe
ISO 3183 Seamless Pipes API 5L X52 Pipe
ISO 3183 LSAW Pipes API 5L X60 Pipe
API 5L Grade B Pipe API 5L X65 Pipe

ISO 3183 L290 Pipes Application

  • Oil and Gas equipments
  • Offshore Technology
  • Seawater Desalination Plants
  • Chemical Industry
  • Airport, Malls, Buildings
  • Storage Tanks
  • Medical Industry
  • Civil Engineering
  • Pressure vessels, Reactor tanks, and Heat exchangers
  • Rotors, impellers and shafts
  • Power Plants
  • Petrochemical
  • Shipbuilding Industry
  • Mining Industry
  • Food Equipments Industry

Test Certificates

We ISO 3183 L290 with the following details Mill Test Certificate according to EN 10204 3.1, PMI Test, Test Report from NABL Approved Lab, 3.2 Certification by External Testing Authority third, ultrasonic test report, and X-ray report.

Quality Assurance

At ISO 3183 L290 all types of Such as L210 or A, L245 or B, L290 or X42, L320 or X46 from raw material purchase to production and product shipping. They are visually inspected for compliance with ASTM, ASME, DIN, EN and JIS codes and standards. We can also designate certified official testing agencies upon customer request so that they can witness the product's material, size and quality compliance reports.

Marking & Packing

Our ISO 3183 L290 is packaged to ensure no damage during transit. In the case of export, the standard export packing is in a wooden box. All ISO 3183 L290 are marked with our grade, batch number, size and mark. We can also do custom branding on our products as per buyer's unique requirements

Supplying ISO 3183 L290 Pipes to Countries -

We Export ISO 3183 L290 Pipes to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East Etc.

Distributing ISO 3183 L290 Pipes to Cities -

We Export ISO 3183 L290 Pipes to Navi Mumbai, Indore, Baroda, Muscat, Secunderabad, Gimhae-si, Kanpur, Colombo, Kuala Lumpur, Bhopal, Pimpri-Chinchwad, Rajkot, Haryana, Hanoi, Ernakulam, Chandigarh, Surat, Los Angeles, Hong Kong, Ahmedabad, Perth, Petaling Jaya, Hyderabad, Mumbai, Algiers, Edmonton, Ludhiana, Ho Chi Minh City, Karachi, Bangkok, Dallas, Bengaluru, Jakarta, Granada, Seoul, Cairo, Geoje-si, Rio de Janeiro, Abu Dhabi, Port-of-Spain, Sydney, London, Courbevoie, Vung Tau, Sharjah, Jaipur, Lahore, Chennai, Istanbul, Lagos, Thane, Dubai, Coimbatore, La Victoria, Calgary, Jeddah, Busan, Mexico City, Al Khobar, Caracas, Singapore, Atyrau, Manama, Kolkata, Riyadh, Jamshedpur, Brisbane, Toronto, Noida, Ahvaz, Vadodara, Doha, Visakhapatnam, Ulsan, New Delhi, Gurgaon, Bogota, Howrah, Moscow, Nashik, Ranchi, Nagpur, Al Jubail, Houston, Milan, Chiyoda, Aberdeen, Melbourne, New York, Dammam, Montreal, Santiago, Kuwait City, Pune, Tehran, Thiruvananthapuram, Faridabad, Madrid, Ankara Etc.

Frequently Ask Questions (FAQ)

ISO 3183 L290 Seamless Pipe, ISO 3183 L290 LSAW Pipe, ISO 3183 L290 API Pipe, iso 3183 pdf, iso 3183:2019, iso 3183:2019 pdf, iso 3183 latest edition, iso 3183 2017 pdf, iso 3183 pdf free download, iso 3183 l450 equivalent, en iso 3183, API 5L X42 Pipe