ISO 3183 L245 Pipe, ISO 3183 L245 Line Pipe, ISO 3183 L245 Seamless Pipe, ISO 3183 L245 LSAW Pipe, ISO 3183 Grade L245 Pipe, ISO 3183 L245 PSL1 Pipe, ISO 3183 L245 PSL2 Pipe, API 5L Grade B Pipe.
Dealer of ISO 3183 L245 Pipe. Our ISO 3183 L245 Pipe is IBR Approved, we are Best Dealer, Distributor, Exporter, Supplier in India.
ISO 3183 L245 is a specification for the steel pipe used in the petroleum and natural gas industries. It is part of the ISO 3183 standard series, which defines various grades of line pipe materials suitable for transporting fluids such as oil, gas, and water in pipelines. L245 is one of the grade designations within this standard.
Valour Alloys Inc., we carry a full inventory of ISO 3183 L245 Pipes products in a variety of sizes to meet the structural piping requirements for applications the water, petroleum, oil & gas and other industries. ISO 3183 L245 Pipe can be Structural in Nature or used in Fluid, Gas, Oil Transmission.
We are specializes in ISO 3183 L245 Pipes with years of Experience in Manufacturing ISO 3183 Carbon Steel Pipes. we offer high quality, lower cost but the best service. As a result to that our ISO 3183 Carbon Steel Pipes export account today is in various countries like Iran, Iraq, Kuwait, Saudi Arabia, Oman, UAE, Singapore, Malaysia, Indonesia, South korea, Chile, Peru, Venezuela, Australia, Nigeria, Angola, Senegal, Mozambique, Algeria, Libya, Azerbaijan, Netherlands, Brazil, Norway, United Kingdom, Mexico, Canada etc.

ISO 3183 L245 Seamless Pipes

ISO 3183 L245 Welded Pipes
We Supply ISO 3183 Seamless Pipe in ISO 3183 L245 PSL1, ISO 3183 L245 PSL2, ISO 3183 L290 PSL1, ISO 3183 L290 PSL2, ISO 3183 L320 PSL1, ISO 3183 L320 PSL2, ISO 3183 L390 PSL1, ISO 3183 L390 PSL2, ISO 3183 L415 PSL1, ISO 3183 L415 PSL2, ISO 3183 L450 PSL1, ISO 3183 L450 PSL2. The grade indicates the testing methods required for a given application. It is critical that structural grades of Carbon Steel Pipe not be used for Pressure or Fluid applications.
ISO 3183 L245 Pipes Suppliers, ISO 3183 L245 Seamless Pipe,one of the leading stockist of ISO 3183 L245 Pipes, ISO 3183 L245 Welded Pipe, Largest Manufacturer of ISO 3183 Pipes in Mumbai India, High Qaulity Exporter of ISO 3183 Pipes
Grade Designation: L245 is a grade within the ISO 3183 standard, and it specifically refers to the minimum yield strength of the steel pipe. In the case of L245, the minimum yield strength is approximately 35,500 psi or 245 MPa.
Usage: ISO 3183 L245 pipes are commonly used in the construction of pipelines for the transportation of oil, gas, and other hydrocarbons. These pipelines are essential for the safe and efficient movement of these fluids over long distances.
Manufacturing: ISO 3183 L245 pipes are manufactured using a controlled process that ensures the steel's quality and performance characteristics. This includes considerations for chemical composition, mechanical properties, and dimensional tolerances.
Properties: The L245 grade is chosen for its balance of strength, toughness, and weldability. It is suitable for various pipeline applications, including those involving low to moderately high pressure and temperatures.
International Standard: ISO 3183 L245 is an international standard, which means that it is recognized and used globally. This standardization helps ensure uniformity and compatibility in the construction of pipelines, facilitating international trade and cooperation in the oil and gas industry.
Compliance: Manufacturers and users of ISO 3183 L245 pipes must adhere to the standard's requirements to ensure the integrity and safety of the pipelines. Compliance with ISO standards is often a prerequisite in the procurement and construction of pipelines.
ISO 3183 L245 is a standardized grade of steel pipe designed for use in the oil and gas industry, characterized by its specified minimum yield strength and suitability for pipeline applications. It plays a crucial role in the transportation of hydrocarbons, contributing to the global energy infrastructure.
ISO 3183 L245 Pipe Range
ISO 3183 L245 Pipe Outer Diameter Size | 3/8" NB To 30" NB (Nominal Bore Size) |
ISO 3183 L245 Pipe Wall Thickness | Schedule 20 To Schedule XXS (Heavier On Request) Up to 250 mm Thickness |
ISO 3183 L245 Pipe Length | 5 To 7 Meters, 09 To 13 Meters, Single Random Length, Double Random Length And Customize Size. |
ISO 3183 L245 Pipe Ends | Plain Ends / Beveled Ends / Coupling |
ISO 3183 L245 Pipe Specification | ISO 3183 |
ISO 3183 L245 Pipe Grades | ISO 3183 Grade L245 PSL1, ISO 3183 Grade L245 PSL2, ISO 3183 Grade L290 PSL1, ISO 3183 Grade L290 PSL2, ISO 3183 Grade L320 PSL1, ISO 3183 Grade L320 PSL2, ISO 3183 Grade L360 PSL1, ISO 3183 Grade L360 PSL2, ISO 3183 Grade L390 PSL1, ISO 3183 Grade L390 PSL2, ISO 3183 Grade L415 PSL1, ISO 3183 Grade L415 PSL2, ISO 3183 Grade L450 PSL1, ISO 3183 Grade L450 PSL2, ISO 3183 Grade L485 PSL1, ISO 3183 Grade L485 PSL2 |
ISO 3183 L245 Pipe Dimension | All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM, ASME, API. |
ISO 3183 L245 Pipe Type | Seamless / Welded |
ISO 3183 L245 Pipe Delivery Conditions | As Rolled, Normalizing Rolled, Hot Forming, Cold Finishing Thermomechanical Rolled / Formed, Normalizing Formed, Normalized and Tempered / Quenched and Tempered - BR / N / Q /T |
ISO 3183 L245 Pipe Coating | Epoxy Coating / Colour Paint Coating / 3LPE Coating. |
ISO 3183 L245 Pipe Machinery | Draw Bench / Pilger / De-Coiler / Edge Miller / Welding Line / Heat Treatmen Furnace / Pickling Tank / Cutting Bench etc. |
ISO 3183 L245 Pipe Value Added Services | Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Galavanizing / Heat Treatment |
ISO 3183 L245 Pipe Packaging | Loose / Bundle / Wooden Pallet / Wooden Box / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
ISO 3183 L245 Pipe Shipment & Transportation | By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet |
ISO 3183 L245 Pipe Other Testing | NACE MR0175, NACE TM0177, SOUR SERVICE, NACE TM0284, PWHT, HIC TEST, SSC TEST, SWC, H2 SERVICE, IBR, IPS-M-PI190, IPS-M-PI-221 APPENDIX G Etc. |
ISO 3183 L245 Pipe Material Test Certificate | Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab./ Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC |
Chemical Composition of ISO 3183 L245 PSL1 Pipes
Steel grade (Steel name) |
Mass fraction, based upon heat and product analyses a % | |||||||
C | Mn | P | S | V | Nb | Ti | ||
max. b | max. b | min. | max. | max. | max. | max. | max. | |
Seamless Pipe | ||||||||
L210 or A | 0,22 | 0,90 | - | 0,03 | 0,03 | |||
L245 or B | 0,28 | 1,20 | - | 0,03 | 0,03 | c,d | c,d | d |
Welded Pipe | ||||||||
L210 or A | 0,22 | 0,90 | - | 0,03 | 0,03 | |||
L245 or B | 0,26 | 1,20 | - | 0,03 | 0,03 | c,d | c,d | d |
a 0,50 % maximum for copper; 0,50 % maximum for nickel; 0,50 % maximum for chromium; and 0,15 % maximum for molybdenum,For grades up to and including L360/X52, Cu, Cr and Ni shall not be added intentionally. b For each reduction of 0,01 % below the specified maximum concentration for carbon, an increase of 0,05 % above the specified maximum concentration for manganese is permissible, up to a maximum of 1,65 % for grades W L245 or B, but u L360 or X52; up to a maximum of 1,75 % for grades > L360 or X52, but < L485 or X70; and up to a maximum of 2,00 % for grade L485 or X70, c Unless otherwise agreed, the sum of the niobium and vanadium contents shall be u 0,06 %, d The sum of the niobium, vanadium and titanium concentrations shall be u 0,15%, e Unless otherwise agreed. f Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be u 0,15 %. |
Chemical Composition of ISO 3183 L245 PSL2 Pipes
Steel grade (Steel name) |
Mass fraction, based upon heat and product analyses a % | Carbon equivalent a % maximum | |||||||||
C | Si | Mn | P | S | V | Nb | Ti | Other | CE iiw | CE pcm | |
Seamless Pipe | |||||||||||
L245R or BR | 0,24 | 0,4 | 1,2 | 0,025 | 0,015 | c | c | 0,04 | e | 0,43 | 0,25 |
L290R or X42 R | 0,24 | 0,4 | 1,2 | 0,025 | 0,015 | 0,06 | 0,05 | 0,04 | e | 0,43 | 0,25 |
L245N or BN | 0,24 | 0,4 | 1,2 | 0,025 | 0,015 | c | c | 0,04 | e | 0,43 | 0,25 |
L245Q or BQ | 0,18 | 0,45 | 1,4 | 0,025 | 0,015 | 0,05 | 0,05 | 0,04 | e | 0,43 | 0,25 |
Welded Pipe | |||||||||||
L245M or BM | 0,22 | 0,45 | 1,2 | 0,025 | 0,015 | 0,05 | 0,05 | 0,04 | e | 0,43 | 0,25 |
a Based upon product analysis. For seamless pipe with t > 20,0 mm (0.787 in), the carbon equivalent limits shall be as agreed. The CEIIW limits apply if the carbon mass fraction is greater than 0,12 % and the CEPcm limits apply if the carbon mass fraction is less than or equal to 0,12 %. b For each reduction of 0,01 % below the specified maximum for carbon, an increase of 0,05 % above the specified maximum for manganese is permissible, up to a maximum of 1,65 % for grades W L245 or B, but u L360 or X52; up to a maximum of 1,75 % for grades > L360 or X52, but < L485 or X70; up to a maximum of 2,00 % for grades W L485 or X70, but u L555 or X80; and up to a maximum of 2,20 % for grades > L555 or X80. c Unless otherwise agreed, the sum of the niobium and vanadium concentrations shall be u 0,06 %. d The sum of the niobium, vanadium and titanium concentrations shall be u 0,15 %. e Unless otherwise agreed, 0,50 % maximum for copper, 0,30 % maximum for nickel, 0,30 % maximum for chromium and 0,15 % maximum for molybdenum. f Unless otherwise agreed. g Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be u 0,15 %. Unless otherwise agreed, 0,50 % maximum for copper, 0,50 % maximum for nickel, 0,50 % maximum for chromium and 0,50 % maximum for molybdenum. i Unless otherwise agreed, 0,50 % maximum for copper, 1,00 % maximum for nickel, 0,50 % maximum for chromium and 0,50 % maximum for molybdenum. j 0,004 % maximum for boron. |
Mechanical Properties of ISO 3183 L245 PSL1 Pipes
Pipe Grade | Pipe Body of Seamless and Welded Pipes | Weld seam of EW, SAW and COW pipes | ||
Yeild strength a | Tensile strength a | Elongation | Tensile strength b | |
Rt0.5 | Rm | Af | Rm | |
Mpa (psi) | Mpa (psi) | % | Mpa (psi) | |
minimum | minimum | minimum | minimum | |
L210 or A | 210 (30 500) | 335 (48 600) | c | 335 (48 600) |
L245 or BR L245 or B |
245 (35 500) | 415 (60 200) | c | 415 (60 200) |
Mechanical Properties of ISO 3183 L245 PSL2 Pipes
Pipe grade | Pipe Body of Seamless and Welded Pipes | weld seam of HFW, SAW and COW pipes | |||||
Yield Strength a | Tensile Strength a | Ratio a,b,c | Elongation Af | Tensile strength d | |||
Rt0.5 b | Rm | Rt0,5lRm | Rm | ||||
Mpa (psi) | Mpa (psi) | % | Mpa (psi) | ||||
minimum | maximum | minimum | maximum | maximum | minimum | minimum | |
L245R or BR L245N or BN L245Q or BQ L245M or BM |
245 (35 500) |
450 e (65 300) e |
415 (60 200) |
760 (110 200) |
0,93 | f | 415 (60 200) |
Other Available Products of ISO 3183 Pipes
Carbon Steel ISO 3183 Line Pipes | ISO 3183 L245 Pipe Supplier |
ISO 3183 L245 Pipe | ISO 3183 L290 Pipe Dealer |
ISO 3183 L290 Pipe | ISO 3183 L320 Pipe Stockholder |
ISO 3183 L320 Pipe | ISO 3183 L360 Pipe Exporter |
ISO 3183 L360 Pipe | ISO 3183 L390 Pipe Distributor |
ISO 3183 L390 Pipe | ISO 3183 PSL1 Pipes |
ISO 3183 L415 Pipe | ISO 3183 PSL2 Pipes |
ISO 3183 L450 Pipe | API 5L X42 Pipe |
ISO 3183 Seamless Pipes | API 5L X52 Pipe |
ISO 3183 LSAW Pipes | API 5L X60 Pipe |
API 5L Grade B Pipe | API 5L X65 Pipe |
ISO 3183 L245 Pipes Application
- Oil and Gas equipments
- Offshore Technology
- Seawater Desalination Plants
- Chemical Industry
- Airport, Malls, Buildings
- Storage Tanks
- Medical Industry
- Civil Engineering
- Pressure vessels, Reactor tanks, and Heat exchangers
- Rotors, impellers and shafts
- Power Plants
- Petrochemical
- Shipbuilding Industry
- Mining Industry
- Food Equipments Industry
Test Certificates
We ISO 3183 L245 with the following details Mill Test Certificate according to EN 10204 3.1, PMI Test, Test Report from NABL Approved Lab, 3.2 Certification by External Testing Authority third, ultrasonic test report, and X-ray report.
Quality Assurance
At ISO 3183 L245 all types of Such as L210 or A, L245 or B, L290 or X42, L320 or X46 from raw material purchase to production and product shipping. They are visually inspected for compliance with ASTM, ASME, DIN, EN and JIS codes and standards. We can also designate certified official testing agencies upon customer request so that they can witness the product's material, size and quality compliance reports.
Marking & Packing
Our ISO 3183 L245 is packaged to ensure no damage during transit. In the case of export, the standard export packing is in a wooden box. All ISO 3183 L245 are marked with our grade, batch number, size and mark. We can also do custom branding on our products as per buyer's unique requirements
Supplying ISO 3183 L245 Pipes to Countries -
We Export ISO 3183 L245 Pipes to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East Etc.
Distributing ISO 3183 L245 Pipes to Cities -
We Export ISO 3183 L245 Pipes to Navi Mumbai, Indore, Baroda, Muscat, Secunderabad, Gimhae-si, Kanpur, Colombo, Kuala Lumpur, Bhopal, Pimpri-Chinchwad, Rajkot, Haryana, Hanoi, Ernakulam, Chandigarh, Surat, Los Angeles, Hong Kong, Ahmedabad, Perth, Petaling Jaya, Hyderabad, Mumbai, Algiers, Edmonton, Ludhiana, Ho Chi Minh City, Karachi, Bangkok, Dallas, Bengaluru, Jakarta, Granada, Seoul, Cairo, Geoje-si, Rio de Janeiro, Abu Dhabi, Port-of-Spain, Sydney, London, Courbevoie, Vung Tau, Sharjah, Jaipur, Lahore, Chennai, Istanbul, Lagos, Thane, Dubai, Coimbatore, La Victoria, Calgary, Jeddah, Busan, Mexico City, Al Khobar, Caracas, Singapore, Atyrau, Manama, Kolkata, Riyadh, Jamshedpur, Brisbane, Toronto, Noida, Ahvaz, Vadodara, Doha, Visakhapatnam, Ulsan, New Delhi, Gurgaon, Bogota, Howrah, Moscow, Nashik, Ranchi, Nagpur, Al Jubail, Houston, Milan, Chiyoda, Aberdeen, Melbourne, New York, Dammam, Montreal, Santiago, Kuwait City, Pune, Tehran, Thiruvananthapuram, Faridabad, Madrid, Ankara Etc.
Frequently Ask Questions (FAQ)
ISO 3183 L245 Seamless Pipe, ISO 3183 L245 LSAW Pipe, ISO 3183 L245 API Pipe, iso 3183 pdf, iso 3183:2019, iso 3183:2019 pdf, iso 3183 latest edition, iso 3183 2017 pdf, iso 3183 pdf free download, iso 3183 l450 equivalent, en iso 3183, API 5L Grade B Pipe